砧字的意思

单独的卷云的形成可以通过雷暴砧状云形成的残余。

Individual cirrus cloud formations can be the remnants of anvil clouds formed by thunderstorms.

型砧常用于刀工。

Swages are often used in bladesmithing.

X3砧罗汉果嫁接苗没有开花。

Seedlings grafted on X3 had not blossomed.

六个鞋砧，练出一个鞋匠。

Six awl make a shoemaker.

好砧不怕锤。

A good anvil does not fear the hammer.

切刀罗拉组包括一切刀罗拉与一刀砧罗拉。

The cutting roller set includes a cutting roller and an anvil roller.

好砧不怕铁锤砸。

A good anvil does not fear the hammer.

在这次过程中砧云区降水约占过程总量的33%。

Precipitation falling from the trailing anvil accounted for 33% of the total rain from the squall line.

本文主要论述了芽苗砧嫁接技术及其研究现状和应用前景。

This thesis mainly discusses Nurse seed grafting technology and its current achievements and application prospect.

靠接加砧结果表明对严重不亲和树出现的症状有较大的缓解。

It is indicated that the result of additional attached stock grafting can clearly reduce the appearance of heavy non-affinity.

可大大提高承击砧的材料利用率，以及设备的可靠性和有效性。

Can greatly improve the anvil bearing material utilization, struck the reliability and validity and equipment.

选择的快速凝固方法为熔体旋转法（MS）和锤砧法（HA）。

The two rapid-solidification techniques employed are melt-spinning technique (MS) and Hammer-and-Anvil technique (HA).

在西北部地区用灌木树篱把它接在实生砧、无性砧及矮化砧上。

In the northwest, they are being planted by hedgerow on seedling roots, clonal and dwarfing stocks.

同一矿质元素在不同种矮化中间砧嫁接树中的表现也不尽相同。

The variation of the same kind of elements in different kind of the above trees were also different.

介绍了国内及国外预应力砧连续刚构桥的发展趋势以及存在的问题。

This paper introduces the tendency of development of constant steel structured bridge of prestressing concrete as well as the problems of it.

分别在两种载荷情况下，对不同料宽比、砧宽比的拔长进行了模拟。

Simulations of blanks with different tool width ratio(TV/H) and blank width ratio (B/H) under two load situations are implemented.

研究了M26中间砧地上部砧段长度对红富士苹果生长发育的影响。

The effects of the aerial part length of dwarfing intermediate stock M26 on the growth and development of Red Fuji apple were studied.

平砧上自由锻拔长，送进量的大小对其拔长效率起着至关重要的作用。

As free drawing on the flat anvil, the size of feed plays the very important role to its drawing efficiency.

使用桥式起重机或其他起重设备及手工具定位和调整砧锻压机械的压模。

Position and adjust dies on anvil of forging machinery using overhead cranes or other hoisting devices and hand tools.

果实可溶性固形物含量以M 7自根砧较高，MM 106中砧较低。

The soluble solid contents of fruit of SRS M7 was highest, 1ss MM106's lowest.

利用红宝石荧光测压方法，测量了压砧砧面以及密封垫片流变区内的压力分布。

The pressure distribution is determined by measuring the pressure at various points between the diamond cullet faces and the thin metal gasket using the ruby fluorescence method.

本文总结了2吨自由锻锤砧下直接隔振装置的特点，并简要介绍其安装施工方法。

In this paper, the features of Under-anvil vibration isolation device for 2-ton forging hammer are summarized, the methods of installation and construction are introduced simply.

此文用塑性泥作模拟材料，进行了压扭复合锻造和不对称V型砧拔长的工艺实验。

The experiments of twist-compression forging and unsymmetrical V-shape die forging are made using plasticine.

旋转模切机砧辊处的偏心量认定与设计计算，有经验计算与工程计算的一般原则方法。

There are experiential and calculating method for eccentricity calculation and it's decision on urethane anvil-roll of the rotary die-cutter.

定性物理模拟实验证明了水平V形砧锻造法是控制轴类锻件力学性能的有效工艺手段。

Qualitative physical modeling verifies the fact that the forging method with horizontal V-shaped anvil is an effective process to control the mechanical properties of axial forgings.

当承击砧磨损严重，难以调整到设计值时，只需更换承击砧而不必更换大质量的承击梁。

When worn anvil bearing strike, difficult to adjust to the design value, only need to change when bearing strike without replacing large quality anvil bearing strike beam.

一位摩洛哥高级文职官员不无惋惜地表示，自己的国家是身处非洲和欧洲的“锤砧之间”。

A senior civil servant in Morocco laments that his country is "between the hammer and the anvil" of Africa and Europe.

无论是平砧拔长还是新fm锻造法，都要对料宽比加以控制，才能实现横向无拉应力锻造。

Only when the blank width ratio is confined, can no crosswise tension stress forging be realized, regardless of flat platen stretching or the new FM forging method.

无论是平砧拔长还是新fm锻造法，都要对料宽比加以控制，才能实现横向无拉应力锻造。

Only when the blank width ratio is confined, can no crosswise tension stress forging be realized, regardless of flat platen stretching or the new FM forging method.